How to Frame a 5x5 Needlepoint with a Black Frame

By Poppy Monk Needlepoint Kits: Canvas Kits & Projects for Adults | Published: 2026-10-30

Category: How-to Guides

Learn how to finish your 5x5 needlepoint project using a black frame. This step-by-step guide covers measuring, mounting, and final assembly with a Poppy Monk frame.

Quick answer

To frame a 5x5 needlepoint with a black frame, choose a frame like the Poppy Monk Black Frame for 5x5 designs, measure your stitched area, mount it carefully, and assemble the frame. This guide walks you through each step.

Choosing the right black frame for 5x5 needlepoint

The Poppy Monk Black Frame for 5x5 needlepoint is designed to fit standard 5x5 canvas kits. However, the mat opening is 4.5 x 4.5 inches, which means about 0.25 inches of your stitching on each side may be hidden. This is fine for most designs, but if your pattern has important details near the edge, consider a custom frame or adjust your stitching placement.

This frame comes as a complete set with a mat and backing, making it a straightforward option for finishing. The black finish complements many color schemes, especially modern or geometric designs.

Step-by-step framing guide

Measure your stitched area: Lay your finished needlepoint flat. Measure the stitched area from edge to edge. Compare this to the frame's mat opening (4.5 x 4.5 inches). If your stitching extends beyond that, mark where it will be hidden. If your design has critical details within 0.25 inches of the edge, consider a custom frame or trim the canvas carefully.
Prepare the canvas: Trim the excess canvas around your stitching, leaving at least 0.5 inches of blank canvas beyond the stitched area. This extra canvas will be folded behind the mat. Use a ruler and sharp scissors for a clean cut. Leaving too little canvas can cause the stitching to pull or shift during mounting.
Mount the needlepoint onto the backing: Place the needlepoint face down. Center the backing board (included with the frame) over the back of the stitching. Fold the excess canvas over the board and secure it with acid-free tape or pins. Ensure the design is straight and taut. Check alignment from the front before taping. A crooked mount is hard to fix once taped.
Insert the mounted canvas into the frame: Remove the mat and backing from the frame. Place the mat over the mounted canvas, then insert the assembly into the frame. Press gently to seat it. Reattach the frame's backing clips or tabs. If the canvas is too thick to fit, remove a layer of backing or use a thinner mounting board.
Finish and display: Clean the glass (if present) with a microfiber cloth. Attach the frame's hanging hardware. Hang your finished piece away from direct sunlight to prevent fading. Use a level when hanging to ensure the frame is straight.

Product details

Black Frame For 5" x 5" Needlepoint: This black frame is designed for Poppy Monk 5x5 needlepoint designs. The mat opening measures 4.5 x 4.5 inches, so some edge stitching may be hidden. Knowing the mat opening size helps you decide if your design will fit without losing important elements near the border.
Black Frame For 5" x 5" Needlepoint