How to Frame an 8x8 Needlepoint with a White Frame

Quick Answer

To frame an 8x8 needlepoint, choose a white frame with a mat opening slightly smaller than your canvas, center your stitched design, and secure it with framing tape or pins before closing the frame back.

Steps to Frame Your 8x8 Needlepoint

1. Prepare the Canvas: Trim the excess canvas to about 1 inch beyond the stitched area, leaving enough to wrap around the mat board. Iron the canvas flat from the back, avoiding the stitches. Common mistake: cutting too close to the stitches. Leave at least 1 inch of margin.
2. Center the Design Behind the Mat: Place the needlepoint behind the mat opening. Adjust until the design is centered and straight. Use a ruler to check alignment from the edges. Checkpoint: ensure the design is not crooked before securing.
3. Secure the Canvas to the Mat Board: Use acid-free framing tape or a staple gun to attach the canvas edges to the back of the mat board. Pull gently to keep the fabric taut without distorting the stitches. Common mistake: over-stretching can warp the canvas. Keep tension even.
4. Assemble the Frame: Place the glass (if included) into the frame, then the mat board with attached canvas. Secure the backing board and frame clips. Wipe the glass clean before closing. Checkpoint: remove dust and fingerprints from the glass before final assembly.
5. Attach Hanging Hardware: Screw in the D-rings or sawtooth hanger on the back of the frame, level with the top edge. Add a wire if desired. Check that the frame hangs straight. Common mistake: placing hardware too low can cause the frame to tilt forward.

Product Facts

• White Frame For 8" x 8" Needlepoint: This all-wood white frame is designed for self-finishing Poppy Monk 8x8 needlepoint designs. The mat opening measures 7.5 x 7.5 inches, and the outside frame dimensions are 11 x 11 x 0.75 inches. The 7.5-inch opening covers the stitched edges neatly, but you should verify that your design's focal area fits within that opening before framing.