White Frame for 8x10 Needlepoint: Mounting Step by Step
By Poppy Monk Needlepoint Kits: Canvas Kits & Projects for Adults | Published: 2026-11-01
Category: Tips & Care
Learn how to mount your 8x10 needlepoint in a white frame without glass. Follow our step-by-step guide for a clean, professional finish that protects your stitching.
Quick answer
Mount your finished 8x10 needlepoint in the White Frame For 8" x 10" Needlepoint by centering the canvas, securing it with pins or thread, and assembling the frame without glass. This method keeps your stitching visible and protected while avoiding the risk of glass pressing on the canvas.
Why glass is optional for needlepoint
Needlepoint has texture and dimension that glass can flatten or damage over time. Glass also traps dust and moisture, which can harm fibers. For these reasons, many stitchers choose to frame needlepoint without glass, especially for pieces that will be displayed in a dry, clean environment.
Check the mat opening against your design
The White Frame For 8" x 10" Needlepoint has a mat opening of 7.5" x 9.5", which is smaller than the full 8x10 canvas. This means the frame will cover about a quarter inch of your needlepoint on each side. Before mounting, decide if that overlap will hide any part of your design. If your stitching extends to the very edge, you may need to adjust your plan or choose a different frame.
Step-by-step mounting instructions
- Block your needlepoint: Lay the canvas face down on a towel, spritz it lightly with water, and pin it square on a blocking board. Let it dry completely. Skipping this step can leave wavy edges that won't sit flat in the frame. Check that the canvas measures a true 8x10 inches after blocking.
- Center the design in the mat opening: Place the frame's mat over the canvas to see how much of the design will be visible. Adjust the canvas until the design is centered within the 7.5" x 9.5" opening. Use a ruler to confirm equal margins on all sides. Mark the canvas edges with a water-soluble pen where the mat will cover, so you can align it later.
- Secure the canvas to the backing: Cut a piece of acid-free foam board to 8x10 inches. Center the canvas over it and fold the excess canvas to the back. Use stainless steel pins or a running stitch with heavy thread to hold the canvas taut, working from the center outward. Avoid using tape or glue directly on the canvas, as these can damage fibers over time.
- Attach the canvas to the frame: Place the mounted canvas into the frame's recess. If using the glass, clean it first and insert it behind the canvas (so the canvas is in front). Then secure the backing with the frame's clips or points. If you prefer no glass, simply omit it and proceed. Make sure no pins or stitches protrude beyond the frame's edge.
- Add a dust cover and hanging hardware: Cut a piece of kraft paper to fit the back of the frame and glue it around the edges to seal out dust. Attach a sawtooth hanger or wire to the back, following the frame's weight recommendations. Let the glue dry completely before hanging.
Product facts
- White Frame For 8" x 10" Needlepoint: All-wood white frame with real glass (not acrylic) and outside dimensions of 9"W x 11"H x 0.75"D. The real glass offers clarity, but you can choose to leave it out if you prefer a glass-free finish; the frame's depth accommodates the canvas and backing.
White Frame For 8" x 10" Needlepoint
